Objective: To evaluate the effects of Streptococcus mutans biofilm/restorative materials interaction on surface roughness, hardness and morphology of materials tested.
Methods: Empress 2 (E2), Filtek Supreme (FS), Vitremer (V) and Ketac Molar Easymix (KM) were tested. Twenty-five disks of each material were made and divided into three storage groups: (1) 100% relative humidity (n=5); (2) growth medium (BHI and 1% sucrose) (n=5); (3) S. mutans biofilm-growth medium (n=15). Before storage, hardness measurements were immediately obtained from group 1 specimens. After 30 days of storage, the specimens were cleaned in order to obtain the surface roughness and hardness values, besides morphology analysis by scanning electron microscopy.
Results: The surface roughness and hardness values obtained from E2 and FS specimens did not present statistically significant differences among the groups 1, 2 and 3 and between immediate and 30-day-old specimens of each material. However, group 3 specimens of V and KM showed statistically significant higher surface roughness means than other groups. Group 1 specimens of V and KM also showed higher hardness values than the immediate values. Group 3 specimens of V presented decreased hardness values compared with other groups. The scanning electron micrographs showed an increase in surface degradation from group 1 to group 3 for FS, V and KM.
Conclusions: Thirty-day-old biofilm promotes a negative effect on the surface morphology of FS, V and KM, on the surface roughness of V and KM and on the hardness of V.