Iridium sputtered at varying pressures and target-substrate-distances evaluated for use as stimulation electrode material

Conf Proc IEEE Eng Med Biol Soc. 2006:2006:3353-6. doi: 10.1109/IEMBS.2006.260541.

Abstract

Iridium was sputtered as the top layer of stimulation electrodes. The coatings were varied in their morphology by adjusting the total deposition pressure and the working distance (WD) of target and substrate. It is shown that the resulting different kinds of morphologies have a strong influence on stimulation characteristics. The combination of high working gas pressure and small WD as well as the combination of medium working gas pressure and larger WD yield the best characteristics on macro-sized test electrodes.

Publication types

  • Evaluation Study
  • Research Support, Non-U.S. Gov't

MeSH terms

  • Biomedical Engineering
  • Coated Materials, Biocompatible*
  • Electric Capacitance
  • Electric Impedance
  • Electric Stimulation Therapy / instrumentation
  • Electrodes, Implanted*
  • Equipment Design
  • Humans
  • Iridium*
  • Materials Testing
  • Microscopy, Electron, Scanning
  • Pressure
  • Surface Properties

Substances

  • Coated Materials, Biocompatible
  • Iridium