Many current light diffusers for photodynamic therapy are inflexible, and the applied light dose is difficult to adjust during treatment, especially on complex body surfaces. A thin and flexible luminous textile is developed using plastic optical fibers as a light distributor. The textile diffuser is evaluated for flexibility, irradiance, brightness distribution, and temperature rise with a 652-nm laser set to 100 mW. The bending force of the textile diffuser resembles a defined optical film. On the textile surface, an average output power of 3.6+/-0.6 mWcm(2) is measured, corresponding to a transmission rate of 40+/-3.8% on an area of 11 cm(2). Aluminum backing enhances the irradiance to the face (treatment side). The measured brightness distribution seems to lie within a range similar to other photodynamic therapy (PDT) devices. A power setting of 100 mW increases the temperature of the textile diffuser surface of up to 27 degrees C, and 1 W raises the temperature above 40 degrees C. Results confirm that the flexible textile diffuser supplies suitable radiation for low fluence rate photodynamic therapy on an area of several cm(2).