A method to accurately measure the position and orientation of an acetabular cup implant from postoperative X-rays has been designed and validated. The method uses 2-D-3-D registration to align both the prosthesis and the preoperative computed tomography (CT) volume to the X-ray image. This allows the position of the implant to be calculated with respect to a CT-based surgical plan. Experiments have been carried out using ten sets of patient data. A conventional plain-film measurement technique was also investigated. A gold standard implant position and orientation was calculated using postoperative CT. Results show our method to be significantly more accurate than the plain-film method for calculating cup anteversion. Cup orientation and position could be measured to within a mean absolute error of 1.4 mm or degrees.