Initial cytotoxicity of novel titanium alloys

J Biomed Mater Res B Appl Biomater. 2007 Nov;83(2):327-31. doi: 10.1002/jbm.b.30799.

Abstract

We assessed the biological response to several novel titanium alloys that have promising physical properties for biomedical applications. Four commercial titanium alloys [Super-TIX(R) 800, Super-TIX(R) 51AF, TIMETAL(R) 21SRx, and Ti-6Al-4V (ASTM grade 5)] and three experimental titanium alloys [Ti-13Cr-3Cu, Ti-1.5Si and Ti-1.5Si-5Cu] were tested. Specimens (n = 6; 5.0 x 5.0 x 3.0 mm(3)) were cast in a centrifugal casting machine using a MgO-based investment and polished to 600 grit, removing 250 mum from each surface. Commercially pure titanium (CP Ti: ASTM grade 2) and Teflon (polytetrafluoroethylene) were used as positive controls. The specimens were cleaned and disinfected, and then each cleaned specimen was placed in direct contact with Balb/c 3T3 fibroblasts for 72 h. The cytotoxicity [succinic dehydrogenase (SDH) activity] of the extracts was assessed using the MTT method. Cytotoxicity of the metals tested was not statistically different compared to the CP Ti and Teflon controls (p > 0.05). These novel titanium alloys pose cytotoxic risks no greater than many other commonly used alloys, including commercially pure titanium. The promising short-term biocompatibility of these Ti alloys is probably due to their excellent corrosion resistance under static conditions, even in biological environments.

Publication types

  • Research Support, N.I.H., Extramural

MeSH terms

  • Alloys / toxicity*
  • Animals
  • BALB 3T3 Cells
  • Biocompatible Materials / toxicity*
  • Fibroblasts / drug effects*
  • Materials Testing
  • Mice
  • Titanium / toxicity*

Substances

  • Alloys
  • Biocompatible Materials
  • Titanium