The effect of supercritical CO(2) (scCO(2)) in 3D latex arrays formed by monodispersed particles of polystyrene (PS), PS cross-linked with divinylbenzene (PS-DVB), and PS block copolymers with 2-hydroxyethyl methacrylate (PS-HEMA), methacrylic acid (PS-MA), acrylic acid (PS-AA), itaconic acid (PS-IA), and a mixture of methacrylic and itaconic acid (PS-IA-MA) has been studied. Sorption of CO(2) into the polymer particles leads to a decrease in the glass transition temperature of the polymer and the swelling of the particles and induces their coalescence. 3D-latex arrays of the former compositions were treated in scCO(2) at temperatures and pressures ranging from 40 to 80 degrees C and from 85 to 197 bar, respectively. The effect of CO(2) on the polymeric template was assessed by scanning electron microscopy and N(2) adsorption analysis. Bare PS and PS-HEMA particles sintered readily in scCO(2) at 40 degrees C and 85 bar. On the other hand, particles containing carboxylic acid groups on their surface (PS-MA, PS-AA, PS-IA, and PS-IA-MA) were, at the same temperature and pressure, more resistant to the CO(2) treatment. For a given polymer composition, the sorption of CO(2) inside the polymer particles, the swelling, and the degree of coalescence depend on the pressure, temperature, and time of the CO(2) treatment. Analysis of the pore size distributions from the N(2) adsorption data has allowed us to quantify the degree of coalescence of the particles in the matrix. By careful control of the experimental variables, the coalescence of the 3D latex array could be finely tuned using CO(2).