Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.