New antibiotic delivery systems based on self-hardening methyl methacrylate (MMA)/polymethyl methacrylate (PMMA) systems and phosphate glasses (PG) in the system P(2)O(5)-CaO-Na(2)O have been developed. Self-curing formulations were prepared by mixing the solid component containing PMMA beads, different proportions of PG (30-70 wt %) and vancomycin (5 wt %) as antibiotic, with the liquid component made of MMA monomer. Dough and setting times increased with the content of PG but peak temperature decreased to values well below to guarantee the chemical stability of the antibiotic drug, gentamicin or vancomycin. Mechanical properties of the PMMA/PG composites were evaluated in compression test giving rise to values of compressive strength in the range of 100 MPa. The release of vancomycin was analyzed in vitro by immersion of samples in phosphate buffer of pH=7.4. Release profiles were influenced by the content of PG present in the cement. An initial burst of drug release was observed in all cases. The composites with 70 wt % PG released nearly the total amount of drug loaded in a period of 45 days, and those containing 60 wt % PG released the 70% of the vancomycin in the same period of time. However, either the control of the composite with 30 wt % PG released only the 30% of the drug in 10-15 days. The surface of the drug-loaded composites before and after release experiments was analyzed by ESEM. The deposition of some aggregates at certain points of the surface was detected for the specimens immersed in buffer phosphate after 45 days. This material was characterized by FTIR and Raman spectroscopy as an amorphous phosphate formed by calcium ortho and pyrophosphates, and indicates an interaction between the hydrated layer at the place of the glass and the surrounding medium.