Assessment of data quality for the NHEXAS--Part II: Minnesota children's pesticide exposure study (MNCPES)

J Expo Anal Environ Epidemiol. 2003 Nov;13(6):465-79. doi: 10.1038/sj.jea.7500315.

Abstract

The Minnesota Children's Pesticide Exposure Study (MNCPES) of the National Human Exposure Assessment Survey (NHEXAS) was conducted in Minnesota to evaluate children's pesticide exposure. This study complements and extends the populations and chemicals included in the NHEXAS Region V study. One of the goals of the study was to test protocols for acquiring exposure measurements and developing databases for use in exposure models and assessments. Analysis of the data quality is one element in assessing the performance of the collection and analysis protocols used in this study. Data quality information must also be available to investigators to guide analysis of the study data. During the planning phase of MNCPES, quality assurance (QA) goals were established for precision, accuracy, and quantification limits. The data quality was assessed against these goals. The assessment is complex. First, data are not available for all analytes and media sampled. In addition, several laboratories were responsible for the analysis of the collected samples. Each laboratory provided data according to their standard operating procedures (SOPs) and protocols. Detection limits were authenticated for each analyte in each sample type. The approach used to calculate detection limits varied across the different analytical methods. The analytical methods for pesticides in air, food, hand rinses, dust wipe and urine were sufficiently sensitive and met the QA goals, with very few exceptions. This was also true for polynuclear aromatic hydrocarbons (PAHs) in air and food. The analytical methods for drinking water and beverages had very low detection limits; however, there were very little measurable data for these samples. The collection and analysis methods for pesticides in surface press samples and soil, and for PAHs in dust wipes were not sufficiently sensitive. Accuracy was assessed primarily as recovery from field controls. The results were good for pesticides and PAHs in air (75-125% recovery). Recovery was lower (<75%) for pesticides in drinking water and beverages. The recovery of pesticides from hand rinses met QA goals (75-100%), but surface press samples showed lower recovery (50-70%). Analysis by gas chromatography-mass spectrometry (GC-MS) did not confirm the presence of atrazine and other pesticides in hand rinse and surface press samples that had been detected by GC-ECD, but instead GC-MS confirmed background interferences. Assessment of the precision of sample collection and analysis is based on the percent relative standard deviation (%RSD) between the results for duplicate samples. Data are available only for pesticides and PAHs in air. Precision was good (<20% RSD) for analytes with measurable data. There were a few analytes with %RSD >20%, but the number of data pairs was very small in these cases. Precision for instrumental analysis of food sample extracts was excellent, with the median %RSD < 20 for all measurable pesticides. The median %RSD for the analysis of replicate aliquots of food from the same sample composite was considerably higher, indicating the potential for inhomogeneity of food homogenates.

Publication types

  • Evaluation Study
  • Research Support, U.S. Gov't, Non-P.H.S.

MeSH terms

  • Child
  • Child Welfare*
  • Data Collection / statistics & numerical data
  • Databases, Factual
  • Environmental Exposure*
  • Environmental Pollutants / analysis*
  • Environmental Pollutants / poisoning
  • Health Surveys*
  • Humans
  • Pesticides / analysis*
  • Pesticides / poisoning
  • Quality Control
  • Reference Values
  • Reproducibility of Results
  • Sensitivity and Specificity
  • Specimen Handling

Substances

  • Environmental Pollutants
  • Pesticides