Work of breathing-tidal volume relationship: analysis on an in vitro model and clinical implications

J Clin Monit Comput. 1999 Feb;15(2):119-23. doi: 10.1023/a:1009912827854.

Abstract

Objective: Work of breathing (WoB) is currently employed to assess the afterload on the respiratory muscles and to estimate the energy expenditure for breathing. Since WoB depends on the ventilated tidal volume (TV), WoB*L(-1), the indicized form of WoB has been employed as a measure of WoB which is independent of TV. Actually, the independence of WoB*L(-1) from the ventilated TV has never been demonstrated. The aim of this study was to verify the predicted TV-independence of WoB*L(-1) on an in vitro model.

Methods: Our experimental model was constituted as follows: two endotracheal tubes, with internal diameter measuring respectively 6.5 and 8.5 mm, were alternatively connected with two rubber balloons whose compliance was respectively 0.02 and 0.06 L/hPa; the system was mechanically ventilated at ten different tidal volumes, ranging from 0.3-1 l. Flow rate was kept constant (35 l/m) during the whole experiment.

Results: Both elastic components of the model showed a static volume-pressure relationship which was linear in the experimental range of TV. In all combinations of resistance and compliance WoB increased quadratically whereas WoB*L(-1) increased linearly with the growing TV (p < 0.001).

Conclusions: These results demonstrate the TV-dependence of WoB*L(-1) and suggest that WoB*L(-1), if TV changes, cannot be considered as an index of respiratory muscle afterload and should not be used as a guide for weaning patients from the mechanical ventilation. Finally, we introduced a new parameter (WoB1L) which seems to be a more TV-independent measure of respiratory work.

MeSH terms

  • Humans
  • Lung Compliance
  • Models, Biological
  • Models, Structural
  • Respiration, Artificial
  • Respiratory Mechanics
  • Tidal Volume*
  • Work of Breathing*