The electrothermal atomization of the volatile elements arsenic, antimony and thallium from a refractory metal platform consisting of a tungsten coil and/or a refractory metal foil with the dimensions of a conventional graphite platform was studied. Several combinations of refractory metal platforms were investigated, as follows: W platform; Ta platform; W coil; W coil on a W platform and W coil on a Ta platform. The best combination for these elements as regards both thermal stabilization and sensitivity is the W coil on a Ta platform. Thermal stabilization is also achieved with a W coil on a W platform. The presence of Pd-containing chemical modifier favors the thermal stabilization of the analytes. The sufficient amount is 2 micrograms of Pd. The maximal temperatures of pyrolysis are higher (arsenic, antimony) or equal (thallium) to those when using different chemical modifiers, added as solutions. It may be concluded, that the refractory metal platforms act as "built-in modifiers". They are suitable for the determination of arsenic, antimony and thallium in samples of complex matrix composition where high thermal stability of the analytes during the pyrolysis step is required.