Partially biodegradable acrylic composites containing poly(methyl methacrylate)-poly(epsilon-caprolactone) (PMMA/PCL) systems were prepared by mixing the corresponding PMMA/PCL beads (89:11, 86:14, 83:17, and 77:23 weight ratio) used as solid phase with methyl methacrylate (MMA) (liquid phase) in a solid/liquid ratio of 1.5:1. The physical and chemical microheterogeneity of these beads influenced significantly the curing parameters, because several aspects involved in the polymerization reaction are closely related to both morphology and size distribution of the particles. In vitro behavior was studied by immersion in simulated body fluid at pH = 7.4 and 37 degrees C for more than 8 weeks and the composition was followed by 1H-nuclear magnetic resonance spectroscopy. Approximately 2% wt/wt weight loss was observed after a period of 8 weeks for the composites richest in PCL. Mechanical properties of the dry and wet specimens were evaluated by compressive and tensile tests. In all cases, the presence of PCL in the composites provided a significant decrease in both compressive strength and elastic modulus compared with plain PMMA. Tensile and compressive strength also decreased significantly after 2 weeks of immersion in simulated body fluid compared with dry specimens. The self-curing composites based on PMMA/PCL beads and loaded with 3% wt/wt vancomycin were evaluated as carriers for local release of antibiotics. The composite prepared with beads of PMMA/PCL ratio 86:14 was the most effective. It eluted 64% of the initial drug within the first 5 h, allowing progressive release of nearly the total amount of the initial drug (90%) in approximately 2 months. The results obtained suggest that the described composites can be suitable for antibiotic release in non-load bearing graft applications.
Copyright 2002 Wiley Periodicals, Inc.