The mechanical stability of biofilms is important for biotechnology, as sloughing of the biomass due to mechanical failure of the biofilm matrix can lead to severe interferences with biofilm processes. In cases of biofouling, biofilms have to be removed, in which case their mechanical stability must be overcome. The apparent modulus of elasticity and the yield strength as obtained from uniaxial compression experiments can be taken as parameters indicative for the mechanical stability of a biofilm. A film rheometer is presented which allows for the determination of these quantities, using model biofilms of Pseudomonas aeruginosa grown on membrane filters. The compressive stress-strain behaviour up to the point of failure is recorded at a compression speed of 1 microm s(-1). In accordance with the stress-strain curve, the investigated biofilm can be described as viscoelastic material, which demonstrates plastic flow properties. The extracellular polymeric substances (EPS), which keep biofilms together, form a temporary network of fluctuating junction points. Above the yield point, the gel structure fails and the system behaves as a highly viscous fluid. The apparent modulus of elasticity and the yield point are considered to be useful parameters for characterizing the mechanical properties of biofilms.