The distribution of growth stresses in leaning trunks of Cryptomeria japonica (L.f.) D. Don was determined by measuring the stresses released by the kerf method with strain gauges glued at specified positions along the trunks. Effects of both tree height and peripheral positions on the surface of leaning trunks on surface growth stress were determined. The inner residual growth strains in leaning trunks were also measured. We found high compression stresses in the lower side of leaning trunks that differed greatly from the tensile stresses in normal erect trunks. However, transverse compression stress was found around the tree trunk in both normal and compression wood. In leaning trees, the distribution of internal stresses in the bent trunk portion differed from that in the erect trunk portion, being compressive on the outside and tensile on the inside. The resistant moment introduced by compression stress generated in compression wood is released by the bending of the leaning trunk. The bending stresses are then superimposed on the original internal growth stress. We demonstrated that Poisson's effect of longitudinal stresses should be considered when evaluating transverse surface growth stresses. The existence and intensity of compression wood development can be assessed by growth stress measurements. We conclude that the compressing force of compression wood functions physiologically to give an upward righting response in a leaning trunk.