The feasibility of three sequential extraction schemes (a modification of the Tessier procedure, the scheme proposed by Meguellati and the protocol designed by BCR (now called the Standards, Measurements and Testing Programme, M&T) have been compared to study the distribution of As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn in sediment samples. The comparison has been performed by analyzing Certified Reference Material (CRM-601), a test material (S-12) and seven sediments from the Odiel Marshes Natural Park (located at the Atlantic coast of southern Spain). Samples were classified as sandy (with low iron oxide and organic matter contents) and clay-silty (with high iron oxide and organic matter contents) sediments. A higher metal mobility, especially under reducing conditions, was more properly assessed using the modified Tessier scheme compared to both the BCR and Meguellati procedures, these two later presenting comparative results for the reducible and residual phases. Significant Hg losses were found using the BCR procedure but the quantification of the acid phase for Cd, Cr and Ni was more reliable than that obtained with the modified Tessier and Meguellati schemes.